Allplast Engineering

ALL PLAST Engineering Ltd, Unit 5, Euro Business Park, Little Island, Cork Ireland. | Telephone : 021-4524866 | Fax : 021-4524867 | e-mail : info@allplastengineering.com

All PLAST Engineering Ltd

304L Stainless Steel

Chromium-Nickel austenitic alloy. Used for a wide variety of applications, this is one of the most familiar and most frequently used alloys in the stainless steel family.

Market Applications
Food and beverage, Pulp and Paper, Chemical Processing, Transportation, Automotive.

Stainless Steel Sheet - Forms Finishes and Tolerances

Allegheny Ludlum sheet stainless steels are flat-rolled products produced by continuous mill rolling, available in coils or cut lengths. Thicknesses range from .018" to .1874" and widths range from 24" to 48". For thicknesses lighter than .018" refer to the mill.

Size Tolerances

Requirements for more restrictive tolerances should be referred to the mill.
Roller Leveled - Not Resquared
Thickness Inch	Nominal Length Inches	Length Tolerance Inch	Nominal Width Inches	Width Tolerance Inch
Under .131	120 and under	+1/8 -0	48 and under	+1/16 -0
Under .131	Over 120	+1/4 -0	48 and under	+1/16 -0
.131 and over	All	+1/4 -0	48 and under	+1/16 -0

Requirements for more restrictive tolerances should be referred to the mill.
Stretcher Leveled and Resquared
Thickness Inch	Nominal Length Inches	Length Tolerance Inch	Nominal Width Inches	Width Tolerance Inch
Under .131	120 and under	+1/16 -0	48 and under	+1/16 -0
Under .131	Over 120	+1/8 -0	48 and under	+1/16 -0
.131 and over	All	+1/8 -0	48 and under	+1/16 -0

Camber Tolerances

*A special camber tolerance of 1/16 inch in 20 feet is available upon individual inquiry request.
Width Inches	*Maximum Camber in 8 Feet Inch**
24 to 36 inclusive	1/8
Over 36 to 48 inclusive	3/32

Camber is the greatest deviation of a side edge from a straight line, the measurement being taken on the concave side by placement against an 8-foot straight edge.

Flatness Tolerances

*Suitable for leveling to 1/4-inch max. on cut line equipment.
Roller Leveled - Annealed Temper
Thickness Inch	Width Inches	*Flatness Tolerance (Maximum Deviation From Horizontal Flat Surface) Inch**
.018 - .1874	24 to 48 incl.	1/2

Stretcher Leveled - Annealed Temper
Thickness Inch	Width Inches	Length Inches	Flatness Tolerance (Maximum Deviation From Horizontal Flat Surface) Inch
Under 3/16	To 48	To 96	1/8
Under 3/16	To 48	Over 96	1/4

Standard Gage Tolerances

*Width through 48" maximum
Thickness-Inch Under Including	Gage Number	*Tolerance-Inch +/-**
.1875 to .1451 .1451 to .1301 .1301 to .1141 .1141 to .0981 .0981 to .0831 .0831 to .0721 .0721 to .0581 .0581 to 0.401 .0401 to .0291 .0291 to .0160	8 & 9 10 11 12 13 14 15 & 16 17 to 19 20 to 22 23 to 27	.007 .006 .005 .005 .004 .004 .003 .003 .002 .0015

Note: Unless otherwise specified, the gage aim will be on the minus side of the tolerance.

Standard Finishes

The chromium-nickel and straight chromium grades of stainless steel sheets can be surface treated to provide a variety of finishes. These methods include pickling, grinding, and rolling.

#1 - Hot rolled, annealed and pickled

#2B - Cold rolled on polished rolls, annealed, pickled, and skin passed on polished rolls

#2D - Cold rolled, annealed, pickled, and skin passed with dull blasted rolls or may be ordered without the dull skin pass for formability or surface considerations.

#3 - Polish

#4 - Polish

Coatings

Adhesive vinyl coverings are available with a range of adhesive strengths for various applications.

For More Information on STAINLESS STEEL 316L & 304L

Please contact us via Telephone : +353-21-4524866

Email : info@allplastengineering.com

ALL PLAST Engineering Ltd , Unit 5, Euro Business Park, Little Island, Cork Ireland.
Telephone : 021-4524866 | Fax : 021-4524867 | e-mail : info@allplastengineering.com